Let us Begin...

Published on June 28, 2009 By yngmon In Everything Else

Blessing's to all who have found their way to my door step. By clicking this site you have allowed yourself

to become aware. Before you can understand what it is to be aware; first you must remember what it felt

like to be unaware. To do this there is an exercise as simple as breathing; that once mastered will allow

you to bridge the gap between the con. matrix vs. the subcon. matrix.

There is no fee, for if it were you and I would have never became aware. If you have arrived here to soon;

I wish you well on your travel. It is best that way;................."For receiving to early is as bad recieving to late."

Comments (Page 10)

136

yngmon

on Jul 28, 2009

................The point in this thread is to show those who seek..............that all may be used for a more grander purpose.... it may be used to build.

For one mans trash is another mans treasure....

137

yngmon

on Jul 28, 2009

these

these [ eez ]

pron,

adjective

Definition:

plural of "this": the form of "this" used before a plural noun or with a multiple referent

(pron) These are the people I was telling you about.

(adj) These delays, along with the paperwork, can be costly for banks.

[ Old English þæs, þās, plural of þes (see this)]

this

this [ iss ] CORE MEANING: a grammatical word used to indicate somebody or something already mentioned or identified or something understood by both the speaker and hearer

(adj) This book is brilliant.

(adj) This holiday - how much is it going to cost?

(pron) Is this why you've been so happy lately?

(pron) I first encountered this while traveling abroad.

Definition:

1. adjective close by: used to indicate somebody or something present or close by, especially as distinct from somebody or something further away, referred to as "that"

(adj) I much prefer this painting to that one.

(pron) What's this?

2. adjective previously mentioned: used to indicate somebody or something just mentioned

3. adjective indicating words to follow: used to indicate a phrase or statement about to be said

(adj) All I can say is this one word - no.

(pron) Hey, listen to this!

4. adjective stated time: used to refer to a specific time in the past or present

(pron) I expected him back before this.

(adj) At this particular moment she felt she'd never experience such happiness again.

5. adjective not previously mentioned: used to indicate somebody or something not previously mentioned, especially when telling a story to give a sense of immediacy ( informal )

Then this woman came running up to me, shouting at the top of her voice.

6. adverb to this degree: used to emphasize the degree of a feeling or quality

I was this close to quitting.

[ Old English þis, þes< Indo-European]

this and that miscellaneous unimportant

that

that [ stressed at, unstressed ət ] CORE MEANING: a grammatical word used to indicate somebody or something that has already been mentioned or identified, or something that is understood by both the speaker and hearer

.............now that you have "it" who will you share with?.

138

yngmon

on Jul 28, 2009

............and why are "your" words ...................only words?????

..........do u not give them meaning?....................?

.........vice.....?

139

yngmon

on Jul 28, 2009

...................."Who ever is not thinking about there breath knows the drill.......lol

......but if you dont want to start again......please wait for those of us who do.......

or will we meet on the next level?

140

yngmon

on Jul 29, 2009

dem·i·god

-g

)

n. 1. Mythology a. A male being, often the offspring of a god and a mortal, who has some but not all of the powers of a god.

b. An inferior deity; a minor god.c. A deified man.2. A person who is highly honored or revered.

demigod

Noun

1. a. a being who is part mortal, part god b. a lesser deity 2. a godlike person

Collins Essential English Dictionary 2nd Edition 2006 © HarperCollins Publishers 2004, 2006

ThesaurusLegend: Synonyms Related Words Antonyms

Noun	1.	demigod - a person with great powers and abilities superman, Ubermensch leader - a person who rules or guides or inspires others
	2.	demigod - a person who is part mortal and part god daemon deity, divinity, god, immortal - any supernatural being worshipped as controlling some part of the world or some aspect of life or who is the personification of a force de·i·fy (d-f, d-) tr.v. dei·fied, dei·fy·ing, dei·fies 1. To make a god of; raise to the condition of a god. 2. To worship or revere as a god: deify a leader.3. To idealize; exalt: deifying success.

Are we yet aware of our inner thoughts, or have we forgotten?

Why do some do this while others do that?

What abilites do you upgrade? or are you maxed out with your current level?

Why is your exp. so low? Do you not use your abilities to heal?

Or do you pick another tree? For those who understand....ascend to the next...and for those who just remembered their breath,

Go all the way back and start again.

......If you would just "pay" attention.......

That is the price, shiping and handling are free............."no need to worry about C.O.D"....

141

pascarel

on Jul 29, 2009

ok i'll try to clarify the confusion it seems to me i did in your mind:

what i wanted to say to you is that ,when you keep covering a circumference, you can't reach the end if you still think bidimensionally.

ofc it's a simplified view

142

yngmon

on Jul 29, 2009

1 Corinthians 14

14:1 Follow after charity, and desire spiritual gifts, but rather that ye may prophesy.

14:2 For he that speaketh in an unknown tongue speaketh not unto men, but unto God: for no man understandeth him; howbeit in the spirit he speaketh mysteries.

14:3 But he that prophesieth speaketh unto men to edification, and exhortation, and comfort.

14:4 He that speaketh in an unknown tongue edifieth himself; but he that prophesieth edifieth the church.

14:5 I would that ye all spake with tongues but rather that ye prophesied: for greater is he that prophesieth than he that speaketh with tongues, except he interpret, that the church may receive edifying.

14:6 Now, brethren, if I come unto you speaking with tongues, what shall I profit you, except I shall speak to you either by revelation, or by knowledge, or by prophesying, or by doctrine?

14:7 And even things without life giving sound, whether pipe or harp, except they give a distinction in the sounds, how shall it be known what is piped or harped?

14:8 For if the trumpet give an uncertain sound, who shall prepare himself to the battle?

14:9 So likewise ye, except ye utter by the tongue words easy to be understood, how shall it be known what is spoken? for ye shall speak into the air.
14:10 There are, it may be, so many kinds of voices in the world, and none of them is without signification.
14:11 Therefore if I know not the meaning of the voice, I shall be unto him that speaketh a barbarian, and he that speaketh shall be a barbarian unto me.
14:12 Even so ye, forasmuch as ye are zealous of spiritual gifts, seek that ye may excel to the edifying of the church.
14:13 Wherefore let him that speaketh in an unknown tongue pray that he may interpret.
14:14 For if I pray in an unknown tongue, my spirit prayeth, but my understanding is unfruitful.
14:15 What is it then? I will pray with the spirit, and I will pray with the understanding also: I will sing with the spirit, and I will sing with the understanding also.
14:16 Else when thou shalt bless with the spirit, how shall he that occupieth the room of the unlearned say Amen at thy giving of thanks, seeing he understandeth not what thou sayest?
14:17 For thou verily givest thanks well, but the other is not edified.
14:18 I thank my God, I speak with tongues more than ye all:
14:19 Yet in the church I had rather speak five words with my understanding, that by my voice I might teach others also, than ten thousand words in an unknown tongue.

14:20 Brethren, be not children in understanding: howbeit in malice be ye children, but in understanding be men.

14:21 In the law it is written, With men of other tongues and other lips will I speak unto this people; and yet for all that will they not hear me, saith the LORD.
14:22 Wherefore tongues are for a sign, not to them that believe, but to them that believe not: but prophesying serveth not for them that believe not, but for them which believe.
14:23 If therefore the whole church be come together into one place, and all speak with tongues, and there come in those that are unlearned, or unbelievers, will they not say that ye are mad?
14:24 But if all prophesy, and there come in one that believeth not, or one unlearned, he is convinced of all, he is judged of all:
14:25 And thus are the secrets of his heart made manifest; and so falling down on his face he will worship God, and report that God is in you of a truth.
14:26 How is it then, brethren? when ye come together, every one of you hath a psalm, hath a doctrine, hath a tongue, hath a revelation, hath an interpretation. Let all things be done unto edifying.
14:27 If any man speak in an unknown tongue, let it be by two, or at the most by three, and that by course; and let one interpret.
14:28 But if there be no interpreter, let him keep silence in the church; and let him speak to himself, and to God.
14:29 Let the prophets speak two or three, and let the other judge.
14:30 If any thing be revealed to another that sitteth by, let the first hold his peace.
14:31 For ye may all prophesy one by one, that all may learn, and all may be comforted.

14:32 And the spirits of the prophets are subject to the prophets.

14:33 For God is not the author of confusion, but of peace, as in all churches of the saints.

14:34 Let your women keep silence in the churches: for it is not permitted unto them to speak; but they are commanded to be under obedience as also saith the law.

14:35 And if they will learn any thing, let them ask their husbands at home: for it is a shame for women to speak in the church.

14:36 What? came the word of God out from you? or came it unto you only?

14:37 If any man think himself to be a prophet, or spiritual, let him acknowledge that the things that I write unto you are the commandments of the Lord.

14:38 But if any man be ignorant, let him be ignorant.14:39 Wherefore, brethren, covet to prophesy, and forbid not to speak with tongues.

14:40 Let all things be done decently and in order.

..............................We all thank you for your understanding, as well as your overstanding...

and we are all blessed to have such gifted teaches, that take" time" to properly lay out deeply rooted lesson plans.

pascarel

Member No.3,563,140

Karma0

July 29, 2009 15:24:43

ok i'll try to clarify the confusion it seems to me i did in your mind:

what i wanted to say to you is that ,when you keep covering a circumference, you can't reach the end if you still think bidimensionally.

ofc it's a simplified view

14:33 For God is not the author of confusion, but of peace, as in all churches of the saints.

......If confusion lays on the circumference....., then should we not begin our diameter?......................but from the radius?

Just for thought

143

yngmon

on Jul 29, 2009

............................and the end "you" speak of, ...many call THe Beginning............while others only find opportunity and employment.

..For on the next level, we receive wages; so that we may share and barter.

Hypercube

From Wikipedia, the free encyclopedia

Jump to: navigation, search

This article is about the mathematical concept. For the film, see Cube 2: Hypercube.

A cube

A projection of a tesseract (into three dimensional space)

In geometry, a hypercube is an n-dimensional analogue of a square (n = 2) and a cube (n = 3). It is a closed, compact, convex figure whose 1-skeleton consists of groups of opposite parallel line segments aligned in each of the space's dimensions, at right angles to each other and of the same length.

An n-dimensional hypercube is also called an n-cube. The term "measure polytope" is also used, notably in the work of H.S.M. Coxeter, but it has now been superseded.

The hypercube is the special case of a hyperrectangle (also called an orthotope).

A unit hypercube is a hypercube whose side has length one unit. Often, the hypercube whose corners (or vertices) are the 2ⁿ points in Rⁿ with coordinates equal to 0 or 1 is called "the" unit hypercube.

A point is a hypercube of dimension zero. If one moves this point one unit length, it will sweep out a line segment, which is a unit hypercube of dimension one. If one moves this line segment its length in a perpendicular direction from itself; it sweeps out a two-dimensional square. If one moves the square one unit length in the direction perpendicular to the plane it lies on, it will generate a three-dimensional cube. This can be generalized to any number of dimensions. For example, if one moves the cube one unit length into the fourth dimension, it generates a 4-dimensional unit hypercube (a unit tesseract). This process of sweeping out volumes can be formalized mathematically as a Minkowski sum: the d-dimensional hypercube is the Minkowski sum of d mutually perpendicular unit-length line segments, and is therefore an example of a zonotope.

The 1-skeleton of a hypercube is a hypercube graph.

[hide]

[edit] Coordinates

A unit hypercube of n dimensions is the convex hull of the points given by all sign permutations of the Cartesian coordinates $(\pm 1/2, \pm 1/2, \cdots, \pm 1/2)$ . It has an edge length of 1 and an n-dimensional volume of 1.

An n-dimensional hypercube is also often regarded as the convex hull of all sign permutations of the coordinates $(\pm 1, \pm 1, \cdots, \pm 1)$ . This form is often chosen due to ease of writing out the coordinates. Its edge length is 2, and its n-dimensional volume is 2ⁿ.

[edit] Related families of polytopes

The hypercubes are one of the few families of regular polytopes that are represented in any number of dimensions.

The hypercube (offset) family is the first of three regular polytope families, labeled by Coxeter as γ_n. The other two are the hypercube dual family, the cross-polytopes, labeled as β_n, and the simplices, labeled as α_n. A fourth family, the infinite tessellation of hypercubes, he labeled as δ_n.

Another related family of semiregular and uniform polytopes is the demihypercubes which are constructed from hypercubes with alternate vertices deleted and simplex facets added in the gaps, labeled as hγ_n.

[edit] Elements

A hypercube of dimension n has 2n "sides" (a 1-dimensional line has 2 end points; a 2-dimensional square has 4 sides or edges; a 3-dimensional cube has 6 2-dimensional faces; a 4-dimensional tesseract has 8 cells). The number of vertices (points) of a hypercube is 2ⁿ (a cube has 2³ vertices, for instance).

A simple formula to calculate the number of "n-2"-faces in an n-dimensional hypercube is: $2 n 2 - 2 n$

The number of m-dimensional hypercubes (just referred to as m-cube from here on) on the boundary of an n-cube is

$E_{m,n} = 2^{n-m}{n \choose m}$ , where ${n \choose m}=\frac{n!}{m!\,(n-m)!}$ and n! denotes the factorial of n.

For example, the boundary of a 4-cube (n=4) contains 8 cubes (3-cubes), 24 squares (2-cubes), 32 lines (1-cubes) and 16 vertices (0-cubes).

This identity can be proved by combinatorial arguments; each of the $2 n$ vertices defines a vertex in a $m$ -dimensional boundary. There are ${n \choose m}$ ways of choosing which lines ("sides") that defines the subspace that the boundary is in. But, each side is counted $2 m$ times since it has that many vertices, we need to divide with this number. Hence the identity above.

These numbers can also be generated by the linear recurrence relation

$E_{m,n} = 2E_{m,n-1} + E_{m-1,n-1} \!$ , with $E_{0,0} = 1 \!$ , and undefined elements = 0.

For example, extending a square via its 4 vertices adds one extra line (edge) per vertex, and also adds the final second square, to form a cube, giving $E_{1,3} \!$ = 12 lines in total.

Hypercube elements $E_{m,n} \!$
				m	0	1	2	3	4	5	6	7	8	9	10
n	γ_n	n-cube	Petrie polygon projection	Names Schläfli symbol Coxeter-Dynkin	Vertices	Edges	Faces	Cells	Hypercells	5-faces	6-faces	7-faces	8-faces	9-faces	10-faces
0	γ₀	0-cube	.svg" href="/wiki/File:Complete_graph_K1.svg">	Point -	1
1	γ₁	1-cube	.svg" href="/wiki/File:Complete_graph_K2.svg">	Line segment {}	2	1
2	γ₂	2-cube		Square Tetragon {4}	4	4	1
3	γ₃	3-cube		Cube Hexahedron {4,3}	8	12	6	1
4	γ₄	4-cube		Tesseract Octachoron {4,3,3}	16	32	24	8	1
5	γ₅	5-cube		Penteract Decateron {4,3,3,3}	32	80	80	40	10	1
6	γ₆	6-cube		Hexeract Dodecapeton {4,3,3,3,3}	64	192	240	160	60	12	1
7	γ₇	7-cube		Hepteract Tetradeca-7-tope {4,3,3,3,3,3}	128	448	672	560	280	84	14	1
8	γ₈	8-cube		Octeract Hexadeca-8-tope {4,3,3,3,3,3,3}	256	1024	1792	1792	1120	448	112	16	1
9	γ₉	9-cube		Enneract Octadeca-9-tope {4,3,3,3,3,3,3,3}	512	2304	4608	5376	4032	2016	672	144	18	1
10	γ₁₀	10-cube		10-cube icosa-10-tope {4,3,3,3,3,3,3,3,3}	1024	5120	11520	15360	13440	8064	3360	960	180	20	1

[edit] n-cube rotation

Hypercube rotation.

In general, rotation is a planar phenomenon requiring two dimensions to operate. Any additional dimensions in the space that the rotating object is embedded in manifests itself as a stationary set.

No rotation is possible in 1 dimension. An object in 1 dimension cannot rotate without leaving that 1-dimensional space.

In 2 dimensions, both dimensions are used for rotation, leaving a 0-dimensional stationary point. Hence, an object in 2 dimensions rotate about a point. The rotational axis commonly associated with 2-dimensional rotation actually lies outside of the 2-dimensional space itself, and thus is merely an artifact of our natural bias toward 3-dimensional space. Hence, rotation in 2 dimensions is more properly understood as rotation about a center of rotation. Rotations in 2 dimensions are uniquely identified by the center of rotation and the rate of rotation.

In 3 dimensions, objects rotate about an axis, a stationary line, since there is one dimension "left over" as the other two participate in the rotation. The rotational axis is peculiar to odd-numbered dimensions. Rotations in 3 dimensions are uniquely identified by the axis of rotation and the rate of rotation.

Rotation in 4 dimensions are of two kinds: plane rotations and composite rotations. A plane rotation has a stationary plane which an object may rotate "around". This is because two dimensions participate in the rotation while the other two are stationary. Objects in 4 dimensions can also rotate independently in these two leftover dimensions, resulting in a composite rotation composed of two plane rotations at two independent rates of rotation. These composite rotations have a stationary point, just as in 2 dimensions. Hence, rotation in 4 dimensions are identified by a center of rotation, and two rates of rotation (planar rotation being a special case where one of the rates is zero).

In 5 dimensions, rotations have either a rotational axis or a rotational 3-space. With the former, there are two independent rates of rotation, just as in 4 dimensions. With the latter, there is 1 rate of rotation (2 dimensions participating in the rotation, and 3 dimensions forming the stationary 3-space).

In general, in n dimensions, if n is odd then rotations have an axis, and there are (n-1)/2 possible simultaneous plane rotations around that axis. If n is even, then rotations have stationary points (rotational centers), with n/2 possible simultaneous plane rotations. Each possible plane rotation has its own rate of rotation.

........What do u gravitate towards? ....or away from?

....We again thank you.... for in your understaning we understand...

144

yngmon

on Jul 30, 2009

......We welcome you......

..........Please, ........in any tongue, read the Dictionary/encyclopedia....

.....Bless....

145

yngmon

on Jul 30, 2009

....What side of the sun are we on?

....What side of the earth are we on?

...What does "time zone" really mean in the physical?

...Do we understand that it is always daytime.... somewhere?

...Do your actions reflect your thoughts?

Do your thought's carry enough weight to influence your movements?

Does not the amputee retain sensation?.... so is the feeling internal or ex....

......Just answer those questions in whice you feel are un answered....

and your answers should remain where they manifest...

Find anything in need and you find away to share...

bless

146

pascarel

on Jul 30, 2009

2 thoughts, 1st i'm not very sure, 2nd its a nice something i came up in the weirdest and most prolific section of yahoo answers

1 you shouldn't be thinking of the radius, for if you try to make it the widest possible then the circumference would appear more and more like a straight line, with an infinite deeper root and an infinite higher development. But all of this would just be an illusion since yet again, tracing all the circumference you would find yourself straight on the same spot once again. The problem is when the circumference is so long it cannot be ran entirely, either for a lack of skills, power or time. the more the radius is big, the less you can feel the bending and if you dont reach the same spot, you will never be sure enough to comment; without thinking about the reconnaissance of the same spot.

2 the power a person can have turning on and off the light is to control the day and the night but the change he does is so limited in the space that only himself and maybe some couples of people can notice it. And we're still watching it with the eyes!

147

yngmon

on Jul 31, 2009

"And we're still watching it with the eyes!"

.............you have spoken to so many of our new travelers, and we thank you for you kindness...

.....As you can see fellow travelers there are many who will openly share, and it is a just cause in giving. for the new, this subject may offer a different view on matters unspoken...

....we who understand, also feel that what "you" have just shared is also a vital part of lifes equation...

....that is why we have "already" spoken on this "matter". We ask you the reader in our most humble way......please read from the beginning, all the way to this point....and do not judge,,,

for the meek shall be the only who receive.

"and to all who have just arrived for the first time.... this is not the beginning you seek"....and a strong mind will come to understand times "tru" meaning...

Do you see my meaning?...do u c meaning in me?

or am i meaning less.........2 u?

And is it not infinity that adds value to a moment?.......?

"Alpha meets Zeta in balance.....

and it is this balance in whice we shall be able to enjoy lifes wave"....

....I see some have "read"...but have only understanding of that in which they already understood.... And they are filled?

"1 you shouldn't be thinking of the radius, for if you try to make it the widest possible then the circumference would appear more and more like a straight line, with an infinite deeper root and an infinite higher development."

..Let us join out of abundance, viewing through the "minds I"..........seeing only truth.

"But all of this would just be an illusion since yet again, tracing all the circumference you would find yourself straight on the same spot once again."

"the mind is a place that needs no direction, for what meaning does directions hold for matter that has already arrived?"

"And we're still watching it with the eyes!" ????????????

"Man shall not live by bread alone"....for we are thinking on a quantum level...

Bless you for showing both sides of your coin.... we all shall use what you have given...

We invite all to re read from The Beginning... "and try to remember your breath....

bless

148

Fuzzy Logic

on Jul 31, 2009

Light and dark, day and night - there is knowledge here in the light.

A dichotomy... an open door... night to day...

If you do not choose to step through the door, forever will you remain in the dark...

Or you can stand in the doorway and not know whether is is day or night...

Or you can pass through the doorway into the light and go to the next level...

A choice is also a passage between dark and light, between one thought and the next...

149

yngmon

on Jul 31, 2009

.........DEEP ................. Deep.......... Did any body see that ???????? ?????????? Everybody gets 6 karma

.....Well fellow travelers, I see you have joined us all here. I am filled... And I am not alone.

When you are exposed to a force as stong and true as peace, mountains may be moved....if only peice by peice.

......Freely given, so it be given freely? Yes

For is not the "true" darkness nothing of itself? .... but only a shadow.......a illusion so to speak..... to the eye's an eclipse, to the mind a"under" standing....... that is cast by those who seek to obstruct? ? ?

....I know in their inner most sanctum that all seek knowledge. "You" ask where does one start this journey? "You have"........

"Light and dark, day and night - there is knowledge here in the light."

150

yngmon

on Jul 31, 2009

.....As you can see new traveler.... this "site" offers many even more, and less even less.....

For many a different reason.... That is why those of use who have taken the time to read from the

beginning have also partaken in many visible as well as what the blind would call invisible and non

existent "......." Only those who have not followed the, path will find our way of communication

troublesome....."For they will not take the time"

Nor will they truly reach Level 2....

....This shall not be the fate of those who have ventured this far. We shall harvest along side with the

new... Is not every moment a new 1...

What about your breath?

.......again?.........

ok lets make it more of a challenge....

"Everytime you forget about your breath....say "self" im dreaming"

....Take it 1 more step.....

"Everytime you forget,... start over..."

Bless to all and I will see a few of you on the next level...

Welcome Guest! Please take the time to register with us.
There are many great features available to you once you register, including:

Richer content, access to many features that are disabled for guests like commenting on the forums.
Access to a great community, with a massive database of many, many areas of interest.
Access to contests & subscription offers like exclusive emails.
It's simple, and FREE!

these

this

that

1 Corinthians 14

Hypercube

From Wikipedia, the free encyclopedia

Contents

[edit] Coordinates

[edit] Related families of polytopes

[edit] Elements

[edit] n-cube rotation